Jump to content

News & Announcements

A group blog by News & Announcements in General

  • entries
    24
  • comments
    2
  • views
    9,880

Contributors to this blog

About this blog

News about exciting announcements about product releases and updates from across our selection of represented vendors as well as other exciting industry news.

Entries in this blog

News

Mitsubishi FX5U and FX5UC PLC now support Online Program Change in SFC

I'm very excited to announce that with the update the GX Works3 version 1.095Z and firmware 1.290, Online Program Changes are now possible in SFC programming on the FX5U and FX5UC PLCs. We have had the ability to program SFC on the FX5U/FX5UC PLCs for a while now, however if you needed to do a program change it required you to stop the PLC and rewrite the entire program.  With this new update you can use the standard Online Change capability to update your SFC code without having to stop th
Bryon Sol

Bryon Sol in News

0
News

More Windows 11 Compliant Software from Mitsubishi

Mitsubishi Electric Factory Automation group has now released GT Works3, their GOT/HMI design package as Windows 11 compliant. If you have an account with Mitsubishi, you can always look at the Compatibility Matrix here: https://us.mitsubishielectric.com/fa/en/account/my-software-portal/windows-compatibility-matrix/ As of today (June 30, 2022) here is the current compatibility Matrix.  
Bryon Sol

Bryon Sol in News

0
News

Mitsubishi GX Works3 PLC Programming Software is now Windows 11 Compatible

Mitsubishi has released version 1.085P with support for Windows 11.  As of today (May 5, 2022) you should be able to log into the Software Portal at http://us.mitsubishielectric.com/fa/en and download version 1.085P. If you haven't registered your software, you will need to register it first.  If it's already registered and more than a year old, reach out to Gibson Engineering to purchase a Software Maintenance Agreement which will give you 1 year of updates. *GX Works3 is used to prog
Bryon Sol

Bryon Sol in News

0
New IAI Elecylinder Gripper

New ELECYLINDER® Gripper Type PDF Catalog

With Robotics expanding rapidly in the industry, the need for simple, easy to set up grippers for Robotic End of Arm Tooling is more important than ever. Intelligent Actuator makes some of the industries best electric actuators.  With simple setup and unsurpassed quality, their RoboCylinder line of products has been an industry leader for decades. Now IAI has released a new ELECYLINDER Electric gripper.  These 2 position actuators with built-in controllers replace air actuated cylinder

Cognex In-Sight 3D-L4000

Innovative system brings the power of 3D inspections to In-Sight The In-Sight 3D-L4000 is a breakthrough in three-dimensional (3D) vision technology. This unique vision system combines 3D laser displacement technology with a smart camera allowing factory engineers to quickly, accurately, and cost effectively solve a wide variety of inspections. The patented speckle-free blue laser optics, an industry first, acquires high quality 3D images and on-board high-performance processing powe
Paul Rice

Paul Rice

0

UV-C Disinfection Robot

Automated Sterilization of Work Spaces with disinfection top modules for mobile industrial robots    Organizations have started to adapt to a new reality with restrictions in commercial activities and social distancing. In order to protect employees and businesses, Mobile Industrial Robots is providing flexible solutions, especially when it comes to disinfection processes.  Their automated sterilization solution for work spaces is useful across a variety of sectors. Amid this current sit
Paul Rice

Paul Rice

0

DataMan 8700 Series Handheld Barcode Reader

Cutting-edge performance for the toughest codes Manufacturing environments in automotive, medical device, electronics, aerospace, and product security industries require rugged, high performing, and easy to use barcode reading technology to ensure top component traceability and productivity. DataMan 8700 series handheld barcode readers decode the toughest direct part mark (DPM) and label-based codes while withstanding harsh oils, dirt, and water. A built-in display screen enables quick setu
Paul Rice

Paul Rice

0

How are we doing in the COVID-19 crisis and what might the future look like for robotics and advanced manufacturing?

To start, an executive round table happened on Wednesday, September 9th, called “The State of the Global Robotics Industry” at RIA Robotics Week (Link here if you want to watch it). It was an interesting talk about the past couple of months, the current and most importantly the future of advanced manufacturing and robotics. I thought it was great to hear the opinions of some important names of the automation industry.  (If you haven’t watched the round table, feel free to read the summary I
Batu Sipka

Batu Sipka

1

Mitsubishi Electric Launches FR-E800 Inverter Series

FR-E800 brings together advances in quality, performance, and predictive maintenance capabilities in one multi-purpose inverter. The FR-E800 Series variable frequency drive is built upon Mitsubishi Electric’s proven variable speed control technology throughout years of reliable operation across various constant and variable torque applications. Designed to save energy and minimize cost, the FR-E800 brings together advances in quality, performance, and predictive maintenance capabilities in
Bryon Sol

Bryon Sol

0

Cognex In-Sight 9000 12MP Vision System

Single camera solution to multi-camera applications The In-Sight 9000 series offers Cognex’s first rugged, ultra-high-resolution, standalone vision systems. With its ability to acquire and process exceptionally detailed images, the In-Sight 9000 delivers high accuracy part location, measurement, and inspection over a large area—even when mounted at longer distances. Line scan and area scan image acquisition options are available for imaging continuously moving or stationary objects. St
Bryon Sol

Bryon Sol

0

Schmalz ECBPi Electric Vacuum Generator for Collaborative Robots

Intelligent, Autonomous Cobot Pump Schmalz ECBPi vacuum pumpSchmalz CobotPump ECBPi is a new generation of intelligent vacuum generators that do not need compressed air. These flexible pumps are designed for use in mobile robotics, fully automated small parts handling and stationary handling tasks. The intelligent electric vacuum generator includes an integrated interface for controlling and monitoring the handling process. Connection via IO-Link allows process monitoring and predictiv
Bryon Sol

Bryon Sol

0

Meca500 6-Axis Ultra Compact Robot Arm

Mecademic robot arms are intended for industrial use in a wide range of applications including precision assembly, testing & inspection, microprecision positioning, pick & place, and dispensing. The Meca500 is already put to work in various industry sectors such as electronics, pharmaceutical, and health. The Meca500 Ultracompact Robot Arm is less than half the size of other small industrial robots, and its controller is embedded in its base, eliminating the need for a bulky externa
Bryon Sol

Bryon Sol

0

IXA SCARA Robot – Fastest SCARA Robot in the Industry

The high-speed IXA SCARA Robot holds the fastest cycle times and yet achieves a lower price than previous SCARA models. The arch motion smoothly blends both horizontal and vertical motion to accomplish continuous high-speed cycle times. Fastest Cycle Times : The following measurements were taken during arch motion cycle operation under the following conditions. Achieves a Lower Price : The new SCARA robot is even more affordable than previous models. Plus, it offers even better
Bryon Sol

Bryon Sol

0

Flexy 205 Machine IIoT Gateway

datasheet-flexy-205.pdfThe eWON Flexy 205 is an advanced internet data gateway that allows Machine Builders to monitor and collect vital KPIs for analysis and predictive maintenance. With data logging, alarming, built-in web interface, scripting and enhanced internet connectivity, the Flexy 205 is a modular Internet Gateway for your IoT deployment. It also supports VPN Remote Access for easy troubleshooting of your distant industrial equipment. Secure Remote Allow service engineers to
Bryon Sol

Bryon Sol

1

Cognex DataMan 470 Series Premium Fixed-mount Barcode Reader

Designed for high-speed, high-throughput manufacturing and logistics lines, DataMan 470 is the fastest and most powerful reader in the company’s line of industrial barcode readers. DataMan 470 uses new, patent-pending imaging technology to easily solve challenging applications. The High Dynamic Range Plus (HDR+) technology enhances the image quality of 1D and 2D codes, in addition to providing greater coverage and faster speeds than conventional readers. It also reads low contrast and ultra
Bryon Sol

Bryon Sol

0

Verify Code Quality on Every Surface with Cognex DataMan 8070

Barcode verification is the process of grading the quality of barcodes. Barcode verifiers capture images and generate reports to demonstrate compliance to parameters within industry standardization guidelines. The DataMan 8070 series barcode verifier from Cognex is packed with powerful lighting options, robust grading algorithms, a high-speed processing engine, and a high-resolution camera to capture and grade the most difficult direct part mark (DPM) codes. Combined with simple DataMan Set
Bryon Sol

Bryon Sol

0

MiR500 Transports Pallets and Heavy Loads

MiR500 is designed to automate the transportation of pallets and heavy loads across industries. With a payload of 500 kg, speed of 2 m/sec and a footprint of 1350×920 mm, MiR500 is the largest, most powerful, fastest and robust collaborative, autonomous mobile robot from MiR. Safe and efficient maneuvering The collaborative MIR500 safely maneuvers around people and physical obstacles. With its advanced technology and sophisticated software, the robot autonomously navigates to find the
Bryon Sol

Bryon Sol

0

Mitsubishi Electric FR Series 6-Axis Robots

The RV-FR series robot’s “Next-Generation Intelligent Functions” make it simple to carry out work that has always defied automation.With an extensive selection of arm sizes, configurations and protection ratings the MELFA RV-FR-Series line of robots are ready to tackle all of your automation needs. The RV-FR series offers a highly-dynamic 6-axis articulated robot for a high degree of quality. The double-arm structure not only provides a plus in terms of freedom of movement, but also more stabili
Bryon Sol

Bryon Sol

0

MiRHook™ Automated Pallet Fork Transport

Within logistics applications, the MirHook™ mobile industrial robot is often used to tow a pallet with a pallet fork. The mobile robot can locate the pallet fork and transport it to it’s destination autonomously. In this way the employees only have to load and unload the pallet from the pallet fork, saving valuable time by not needing to do the transportation themselves. The MiRHook supports the transport of loads up to 500 kg (1100 lbs) , providing exciting new internal logistics options f
Bryon Sol

Bryon Sol

0

Barcode Process Control Metrics Understanding Key Aspects of Code Quality

This Process Control Metrics (PCM) video provides an overview of the PCM in the Cognex DataMan industrial code readers. It explains the difference between “verification” and “process control metrics”. This educational video talks in detail about Process Control Metrics which allow you to monitor the quality of the codes being read and identify key aspects of the print quality while online to ensure downstream readability. The PCM Application makes it easy to configure and report the PCM res
Bryon Sol

Bryon Sol

0

SICK microScan3 Safety Laser Scanner

The new generation of safety laser scanners from SICK The microScan3 Core safety laser scanner from SICK reliably protects hazardous areas, accesses, and hazardous points. The innovative safeHDDM scan technology sets new benchmarks. The microScan3 combines a small compact design and a large scanning range in one device with high performance in even the toughest environments. The safe network integration of the microScan3 with CIP Safety™ over EtherNet/IP™ is quick and easy. This enable
Bryon Sol

Bryon Sol

0

Actuators for Adding a Seventh Axis to Your Robotic System

Adding a seventh axis to your six-axis robotic system can be beneficial in a number of ways. Your work envelope is expanded, allowing the use of smaller, less-expensive robots. Parts can also be transferred to multiple workstations at greater distances, and more machines and processes are able to be serviced with one robot, which reduces costs. Although the idea of using a linear actuator to move a robot into position sounds simple enough, many factors go into making sure the setup is corre
Bryon Sol

Bryon Sol

0

Wireless Data Setting for Electric Cylinders

Set operating conditions with wireless connection IAI TB3 teachingNow the ELECylinders position adjustments and operating conditions can be set by the TB-03 teaching pendant from outside the equipment, even without a cable connection. The TB-03 can monitor the operating status of up to 16 axes while receiving wireless data from the ELECylinder. Error recovery time can also be shortened by troubleshooting with wireless connection. The ELECylinder electric actuators replace air cyli
Bryon Sol

Bryon Sol

0

MiRHook™ Mobile Industrial Robot

Autonomous mobile robot for towing and transport jobs MiRHook™ is ideal for a wide range of towing jobs, such as efficiently moving heavy products between locations in a manufacturing facility or warehouse. The MiRHook™ 200 supports the transport of loads up to 500 kg (1100 lbs), providing exciting new internal logistics options for heavy or unwieldy cargos. The MiRHook™ robot identifies carts by QR markers and autonomously transports them as you define. MiRHook™ can be incorporated in
Bryon Sol

Bryon Sol

0
×
×
  • Create New...