Search the Community
Showing results for tags 'fx5'.
Found 8 results
-
Version 1.0.0
17 downloads
The attached file demonstrates with code a quick start guide and code examples how to connect the Sick Flexi Compact CPUc2 with built-in Ethernet port to a Mitsubishi iQ-F PLC using predefined protocol support tool simply and easily. -
Version 1.1.0
1 download
The attached file is includes GOT project files, PLC project files and a writeup on how to control your Mecademic Meca 500 from a Mitsubishi FX5 (iQ-F) PLC using the built-in front ethernet port. This could be ported for use with an L, Q or iQ-R PLC with minimal effort. -
Version 1.0.1
3 downloads
The attached file created by Mitsubishi Electric demonstrates how to connect to and control a Mitsubishi MR-JE-C type servo amplifier and motor from an Mitsubishi FX5 (iQ-F) series PLC over CC-Link IE Field Network Basic. This is an Ethernet based protocol and allows for a powerful and yet cost effective motion solution. If you do not need coordinated motion, this method provides a high level of control of independent axes quickly and easily. -
-
Version 1.0.0
16 downloads
The attached file shows how to connect a Mitsubishi iQ-F (FX5) series PLC to a Cognex In-Sight Vision System via MC Protocol Scanner. -
-
Version 2.1.0
11 downloads
The attached file shows how to connect a Mitsubishi iQ-F series PLC to a Mitsubishi Inverter (VFD) via Inverter Protocol over RS-485. This works for all Mitsubishi VFDs with RS-485 built in including the D700, E700, A700 and F700 series. It also works on the new E800, F800 and A800 series if they are ordered with RS-485 instead of Ethernet. -
Version 1.1.0
11 downloads
The attached file shows how to connect a Mitsubishi iQ-F series PLC to a Intelligent Actuator CON type positioning controller via Modbus RTU. This is a cost effective solution for on-the-fly position adjustment of a CON controller without the addition of fieldbus protocols to the IAI CON controller.
